RADIATOR CHAPLETS

Manufacturing Process: Riveting
Additional Names: Stem Chaplets, Ram Chaplets, Shoulder Chaplets, and Single Head Chaplets

Radiator Chaplets are manufactured from mild steel, generally coated with tin and used in thin-walled castings where the chaplet can be set in the pattern or into an insert in the pattern before the mold is formed or rammed. Non-ferrous metals for the stem such as aluminum, and copper, are available upon request.

The information listed in the chart details general characteristics on their dimensional design. These chaplets can have knitting nicks, to aid in fusion, on the stems and a break-off nick above the shoulder. Their heads can be produced in a cross, square, or "SR" open configuration. Additional design modifications can be integrated to meet your specifications.

Length of the stem can be produced from 1/2"-12,7 MM to 3-1/2"-88,9 MM

STANDARD STEM SIZES Note: Stem Sizes Not Listed Can Be Produced Upon Request
FRACTIONAL	DECIMAL	GAGE	METRIC
3/64"	.0475	#18	1,2
1/16"	.0625	#16	1,6
N/A	.0720	#15	1,8
3/32"	.0890	#13	2,3
N/A	.1050	#12	2,7
1/8"	.1200	#11	3,0
N/A	.1350	#10	3,4
3/16"	.1770	#7	4,5
1/4"	.2253	#4	5,7

STANDARD PLATE SIZES Note: Plate Sizes Not Listed Can Be Produced Upon Request
FRACTIONAL	DECIMAL	METRIC	SQUARE	CROSS	S&R OPEN
3/4"	.750	19,0	Yes	Yes	Yes
1"	1.000	25,4	Yes	Yes	No
1-1/4"	1.250	31,7	Yes	Yes	No
1-1/2"	1.500	38,1	Yes	Yes	No
1-3/4"	1.750	44,5	Yes	Yes	No
2"	2.000	50,8	Yes	Yes	No
2-1/4"	2.250	57,2	Yes	Yes	No
2-1/2"	2.500	63,5	Yes	Yes	No
2-3/4"	2.750	69,9	Yes	Yes	No
3"	3.000	76,2	Yes	Yes	No
3-1/4"	3.250	82,6	Yes	Yes	No
3-1/2"	3.500	88,9	Yes	Yes	No